replacement Single Black Carbon Block Water Filter Elements replacement Single Black Carbon Block Water Filter Elements [CarbonBlackFilterSingle] - $67.00 : Australis Water Purifiers, Ceramic Water Filters and Benchtop Water Purifiers - Australia

replacement Single Black Carbon Block Water Filter Elements


$67.00


  • Description
  • Details
  • Reviews

Single Black Carbon Block Water Filter Elements 



8” Rain & City Water Gravity Carbon Block Filter Cartridge


Faster filtering than Ceramic Filters

What is in the box:

  • 1 x Filteroo 8” tank water & town city water Gravity Carbon Block Filter Cartridges
  • Priming washer
  • Instructions

Product Specifications:
  • The carbon cartridge is 200mm (8”) in height & 60mm in diameter.
  • The cartridge threaded stem that holds the cartridge into place is 12.5mm in diameter and 34mm in length
  • The cartridge threaded stem length with the washer on is 30mm
  • Weight is approximately 385g
  • Life Span: 3000 litres or 12 months whichever comes first

  • Please Note: The thread on these black carbon block is the same as the Doulton filter candles and is not compatible with PF-02 but is compatible with PF-04 (K5350)

    Test Results:

    Model

    8" Silver Impregnated Carbon Block with Lead Removal Treatment

    OD x L(mm)

    60 x 200

    Chlorine Removal

    99%

    Bacteria Removal

    99.99%

    Virus Removal

    99.90%

    Lead pH 6.5 @150ppb (NSF 53)

    90%

    Capacity

    3000 Litres


    Operating Performance:

    Working ph range 5.5 - 9.5

    Nominal Flow Rate

    Gravity

    Capacity

    To guarantee performance replace every 3000 Litres or every 12 months when water flow becomes to slow, whichever comes first.

    Size:

    • Height 200mm

    • Diameter 60mm

    • Hole diameter 12.5mm minimum to 20mm maximum

    Long-Lasting Service Life Of 12 Months

    Cartridges are very easy to replace and only have to be changed over as required or every 12 months, whichever comes first. They have a recommended maximum life of 3000 litres.

    Due to the filtration of particulate & sediments from the water during use, the flow of water from the filter may reduce over a period of time.

    If your cartridge water flow rate slows down it is normally only because the outside of the cartridge has blocked with fine sediments. These sediments do build up and can slow the flow rate over time dependant on the volume of sediments in the water supply used to fill the top tank.

    To restore the water flow to its normal level, simply remove the cartridge and follow the backwashing instructions to backwash the cartridge and push sediments back out of the cartridge.

    If after backwashing the water flow is still slow, you can also get some 100 grit sandpaper or a new Skotchbrite scour pad & scrub the outside of the cartridge under a flowing tap, ensuring that the open-ended thread does not contact the water to avoid contamination. Scrub harshly as this cartridge is quite thick & can be scrubbed clean many times.

    Cleanliness is important, wash your hands before handling the cartridge and take care to ensure that no contamination of the cartridge occurs during cleaning. Use a glove or similar so your hands don't touch the cartridge as much as possible.

    NEVER WASH WITH DETERGENTS OR SECOND-HAND SCOURER PADS.

    If the filter is left to stand for more than 3 - 4 days without use, it is recommended that one litre of water be allowed to flow through the cartridge to waste before using.


    Quality water filtration with the minerals Retained


    This is a carbon block cartridge suitable to be used in any gravity water filter it will fit inside. It comes with 2 x cartridges, priming washer and instructions. It is 200mm high x 60mm wide in diameter. It is manufactured for the Filteroo Steel gravity water filters, but it is also the perfect solution for any other brand which is used to filter rain water from a water tank or treated city tap water.

    It is a great choice with a standard 12.5mm threaded end to install into any gravity water filter so long as the gravity water filter top tank has a minimum hole size of 12.5mm or a maximum hole size around 20mm. (Note: You can drill or file the hole in your water filter top tank to be 12.5mm if required.)

    It flows at a much faster flow rate than the ceramic gravity candles, it has fantastic test results and creates contaminant free healthy tasty water.

    If you are filtering rain water, it is great as it will stop all the bugs & bacteria in the water, whilst at the same time it protects you from any herbicides, pesticides or lead that may wash in from your roof. You will hear people say how lovely their rain water is, but rain water tastes even better once it has filtered through a good big block of carbon like this.

    Then for treated city water, you have the same great protection from bugs & bacteria, it has super high removal rates for the common contaminants like chlorine & chlorine by-products, plus it will protect you from any herbicides & pesticides or heavy metals that may be in the water.

    This carbon block gravity water filtration cartridge is made from the highest quality carbon. It combines mechanical filtration and physical adsorption processes to reduce a wide variety of drinking water contaminants of both aesthetic and health concerns.

    This cartridge has a smooth outer shell compressed to repel any sediments, cysts, bugs or bacteria. The pore structure of the carbon enables sufficient contact time for this cartridge to be ideally suited to improving taste and odour.

    You will be battling to find a better carbon block gravity cartridge than this, that’s a fact.

    What Makes This Product Unique

    It is the quality of the carbon used to create the carbon block cartridge and the professional manner in which they are manufactured which has passed all the tests at such high removal rates that makes this cartridge so unique. As the water passes through this cartridge slowly, the contact time with the cartridge allows for such a wide range of contaminant removal. Manufactured for Filteroo Australia who guarantee high-quality materials are always used. This single carbon block gravity cartridge is a highly efficient filter suitable to remove unwanted contaminants from any water supply. It is great for both rain water or chemically treated city water.

    If you would like to remove Fluoride as well, you can simply attach the Filteroo Max Fluoride removal cartridge onto the bottom thread of the carbon cartridge.



    Click here to see how to install your black carbon filter element

    Click here to see how to prime your black carbon filter element

    Click here to see how to back wash your black carbon filter elements
    • Model: CarbonBlackFilterSingle
    • 1 Units in Stock

    Be the first to write a review.  Write a Review.